StockFetcher Forums · General Discussion · Is this a crash or a correction?<< 1 ... 18 19 20 21 22 >>Post Follow-up
Cheese
1,374 posts
msg #146197
- Ignore Cheese		 1/21/2019 2:22:18 PM

Fetcher[
/* Bull or Bear by Marty Chenard */
/* http://www.stocktiming.net/?p=3711 February 5, 2018 */
/* https://www.stockfetcher.com/forums/Filter-Exchange/Connors-TPS/146101/99999 */
/* bull when all three indices have rsi(30) > 50 */
/* bear when all three indices have rsi(30) < 50 */
/* deterioration when one or more indices have rsi(30) < 50 */
symlist(SPY,QQQ,IWM)
set{RSI30, RSI(30) - 50} /* davesaint86 */
set{CRSI_Bar, RSI30} /* davesaint86 */
draw CRSI_Bar /* davesaint86 */
PlotType{CRSI_Bar,zerobar} /* davesaint86 */
]
Cheese
1,374 posts
msg #146201
- Ignore Cheese		 1/21/2019 3:04:13 PM

Fetcher[
/* Bull or Bear by Marty Chenard */
/* http://www.stocktiming.net/?p=3711 February 5, 2018 */
/* https://www.stockfetcher.com/forums/Filter-Exchange/Connors-TPS/146101/99999 */
/* bull when all three indices have rsi(30) > 50 */
/* bear when all three indices have rsi(30) < 50 */
/* deterioration when one or more indices have rsi(30) < 50 */

symlist(SPY,QQQ,IWM)

set{RSI30, RSI(30) - 50} /* davesaint86 */
set{CRSI_Bar, RSI30} /* davesaint86 */
draw CRSI_Bar
PlotType{CRSI_Bar,zerobar}
set{RSI14, RSI(14) - 50} /* davesaint86 */
set{RSI14_line, RSI14}
draw RSI14 on plot CRSI_Bar
set{RSI7, RSI(7) - 50} /* davesaint86 */
set{RSI7_line, RSI7}
draw RSI7 on plot CRSI_Bar

add column rsi(30){rsi30=56?} /* davesaint86 */
add column rsi(14){rsi14=65?} /* davesaint86 */
add column rsi(7){rsi7=72?} /* davesaint86 */

/* davesaint86
If you see something like RSI(30) = 56, RSI(14) = 65 and RSI(7) is = 72,
the position will be 100% be in an uptrend.
*/
]
davesaint86
725 posts
msg #146202
- Ignore davesaint86
modified		 1/21/2019 3:26:29 PM

I forgot who developed the first part of this filter. I look at it frequently.

Fetcher[apply to symlist(spy,iwm,qqq,vxx)
set{vxxc, ind(vxx,close)}
set{vixc, ind(^vix,close)}
set{vxvc, ind(vxv,close)}
set{spyc, ind(spy,close)}
set{spxl, ind(spxl,close)}
set{vix3, ind(^VIX3M,close)}

set{vxvvix, vxvc / vixc}
set{vixavg, cema(vxvvix,5)}
set{vxvvxx, vxvc / vxxc}
set{vxxavg, cema(vxvvxx,5)}



set{riskon, count(vxvvxx > or = to vxxavg,1)}
set{riskof, count(vxvvxx < or = to vxxavg,1)}

set{risk_on, count(vxvvxx crossed above vxxavg,1)}
set{risk_of, count(vxvvxx crossed below vxxavg,1)}


draw ma(50)
draw ma(100)
draw ma(200)

draw vxvvxx on plot vxxavg
draw riskon
draw riskof


add column riskon{riskon=long_spy}
add column separator
add column riskof{riskoff=short_spy}
add column separator

/* Bull or Bear by Marty Chenard */
/* http://www.stocktiming.net/?p=3711 February 5, 2018 */
/* https://www.stockfetcher.com/forums/Filter-Exchange/Connors-TPS/146101/99999 */
/* bull when all three indices have rsi(30) > 50 */
/* bear when all three indices have rsi(30) < 50 */
/* deterioration when one or more indices have rsi(30) < 50 */

set{RSI30, RSI(30) - 50} /* davesaint86 */
set{CRSI_Bar, RSI30} /* davesaint86 */
draw CRSI_Bar /* davesaint86 */
PlotType{CRSI_Bar,zerobar} /* davesaint86 */
add column rsi(7)
add column rsi(14)
add column rsi(30)
chart-length 6 months]
karennma
8,057 posts
msg #146295
- Ignore karennma
modified		 1/28/2019 10:13:51 AM

moved


SAFeTRADE
644 posts
msg #146300
- Ignore SAFeTRADE		 1/28/2019 12:52:11 PM

Note: From CBOE website.

On September 18, 2017 the ticker symbol for the Cboe 3-Month Volatility Index was changed from “VXV” to “VIX3M”

I think I mentioned this when I posted this filter. It is the reason I added VIX3m in the calcs.
karennma
8,057 posts
msg #146307
- Ignore karennma		 1/29/2019 7:41:42 AM

@ davesaint86,

Instead of typing SPY, QQQ etc ... is there an easy way to run that filter using a watchlist?
davesaint86
725 posts
msg #146313
- Ignore davesaint86		 1/29/2019 3:13:27 PM

1. Create watchlist - add symbols.
2. Add watchlist name to filter

apply to watchlist(Name of Watchlist)
Cheese
1,374 posts
msg #146464
- Ignore Cheese		 2/7/2019 10:20:36 AM

karennma, a gentle reminder of this filter written by davesaint86 for you
======================================================

davesaint86
msg #140898 1/12/2018 1:59:26 PM

Here is the actual filter with everything in it Karen.

Submit
Fetcher[

apply to symlist(ddm,dgld,dwt,labd,mco,spgi,goog,v,ma,cboe,rpv,rpg,qqq,mdy,vea,tlt,jnk,ief,gdx,ita,pjp,robo,smh,slv,xib,agq,zsl,uco,sco,oil,ftec,sso,qld,mvv,ddm,tmf,eev,ziv,xiv,cure,ugaz,dgaz,uslv,dslv,uwt,dwt,labu,labd,soxl,soxs,rusl,nugt,dust,upro,tqqq,midu,udow,nvda,cme,schw,ice,eftc,ba,agg,cwi,spy,iwm,dgld,ugld,shy,qid,sds,sqqq,spxu,drn,drv)


draw Bollinger Bands(18,2)
and draw Slow Stochastic(14,3) Fast %K line at 20.00 and draw Slow Stochastic(14,3) Fast %K line at 80.00
and draw Slow Stochastic(14,3) Fast %K line at 50.00
and draw Slow Stochastic(5,1) Fast %K line at 20.00 and draw Slow Stochastic(5,1) Fast %K line at 80.00 and draw Slow Stochastic(5,1) Fast %K line at 50.00
draw ma(18)
draw ma(100)
draw ma(200)
set{E3,dma(8,-5),8)-cma(DMA(8,-5),8) }
set{Longposition, count(E3 > 0,1)}
set{Shortposition, count(E3 < 0,1)}
SET{TRIGGER,0}
draw Longposition on plot
draw Shortposition on plot
draw dma(8,-5),8)
draw cma(DMA(8,-5),8)


set{E4, TSI(5,5,9) - Smoothed TSI(5,5,9)}
set{TDLongposition, count(E3 > 0,1)}
set{TDShortposition, count(E3 < 0,1)}
SET{TDTRIGGER,0}
draw TSI(5,5,9)

set{E9, close above ma(18)}
set{DLongposition, count(E9 > 0,1)}
set{DShortposition, count(E9 < 0,1)}
SET{DTRIGGER,0}


set{CRS1, rsi(4),1)}
set{CRS2, rsi(9),1)}
set{CRS3, rsi(30),1)}
set{CCRS1, CRS1 + CRS2}
set{CCRS2, CCRS1 + CRS3}
set{CCRS3, CCRS2 /3}


set{CRS4, weekly rsi(4),1)}
set{CRS5, weekly rsi(9),1)}
set{CRS6, weekly rsi(30),1)}

set{WCRS1, CRS4 + CRS5}
set{WCRS2, WCRS1 + CRS6}
set{WCRS3, WCRS2 /3}

set{CWRSI1, CCRS3 + WCRS3}
set{C-RSI, CWRSI1 /2}


set{RSI30, RSI(30) - 50}
set{CRSI_Bar, RSI30}
draw CRSI_Bar
PlotType{CRSI_Bar,zerobar}
set{RSI9, RSI(9) - 50}
set{RSI9_line, RSI9}
draw RSI9 on plot CRSI_Bar
set{RSI4, RSI(4) - 50}
set{RSI4_line, RSI4}
draw RSI4 on plot CRSI_Bar

set{drsilong1, count(rsi(30) above 5, 1)}
set{drsilong2, count(rsi(4) above rsi(30), 1)}
set{drsilong3, count(rsi(9) above rsi(30), 1)}
set{drsilong4, drsilong1 + drsilong2}
set{drsilong5, drsilong4 + drsilong3}
set{drsilong, count(drsilong5 equals 3, 1)}
set{drsishort, count(drsilong5 less than 3, 1)}
SET{DRSITRIGGER,0}
draw drsilong on plot
draw drsishort on plot
set{IFT_Bar,IFT(4,1)}
draw IFT_Bar
PlotType{IFT_Bar,zerobar}
DRAW IFT(4,1)
DRAW IFT(4,1) LINE AT .50
DRAW IFT(4,1) LINE AT -.50
DRAW IFT(4,1) LINE AT 0





set{wrsi1, weekly rsi(4)}
set{wrsi2, weekly rsi(30)}
set{wrsi3, count(wrsi1 > wrsi2,1)}


set{wrsilong, count(wrsi3 equals 1, 1)}
set{wrsishort, count(wrsi3 less than 1, 1)}








set{CRS21, ROC(21,1)}
set{CRS63, ROC(63,1)}
set{CRS126, ROC(126,1)}
set{CR1, CRS21 + CRS63}
set{C-RS, CR1 + CRS126}

set{wsto, weekly Slow Stochastics(14,3)}
set{dsto, Slow Stochastics(14,3)}
set{wdsto, wsto + dsto}
set{CSTO, wdsto / 2}


set{TWRSI4, weekly RSI(4)}
set{TWRSI9, weekly RSI(9)}
set{TWRSI30, weekly RSI(30)}
set{TWRSI1, TWRSI4 + TWRSI9}
set{TWRSI2, TWRSI1 + TWRSI30}
set{A-WRSI, TWRSI2 / 3}

set{TDRSI4, RSI(4)}
set{TDRSI9, RSI(9)}
set{TDRSI30, RSI(30)}
set{TDRSI1, TDRSI4 + TDRSI9}
set{TDRSI2, TDRSI1 + TDRSI30}
set{A-DRSI, TDRSI2 / 3}






set{E10, close above Upper Bollinger Bands(18,2)}
set{BBLongposition, count(E10 > 0,1)}
set{BBShortposition, count(E10 < 0,1)}
SET{BBTRIGGER,0}


set{var,ind(^vix,close)}
set{var1,ind(^vxv,close)}
set{ratio,var/var1}

add column separator

add column BBLongposition{BBSell}
add column separator
add column Longposition {DMA8}
add column separator
add column TDLongposition{DTSI}
add column separator
add column drsilong {DRSI}
add column separator
add column DLongposition {MA18}
add column separator

add column wrsilong {WRSI}
add column separator
ADD COLUMN ROC(126,1) {6 mth %}
add column separator
ADD COLUMN ROC(63,1) {3 mth %}
add column separator
ADD COLUMN ROC(21,1) {1 mth %}
add column separator
add column C-RS
add column separator
add column Upper Bollinger Bands(18.2) {Up-BB}
add column separator
add column lower Bollinger Bands(18.2) {Low-BB}
ADD COLUMN SEPARATOR
add column weekly Slow Stochastics(14,3){wSto}
ADD COLUMN SEPARATOR
add column Slow Stochastics(14,3){dSto}
ADD COLUMN SEPARATOR
add column csto
ADD COLUMN SEPARATOR
add column A-WRSI
ADD COLUMN SEPARATOR
add column A-DRSI
ADD COLUMN SEPARATOR
add column c-rsi
ADD COLUMN SEPARATOR
add column IFT(4,1) {dift}
add column separator
add column weekly IFT(4,1) {wift}
add column separator

add column rsi(4){drsi4}
add column separator
add column rsi(9){drsi9}
add column separator
add column rsi(30){drsi30}
add column separator
add column RSI(2)
add column separator
add column ratio
add column separator
add column atr(21) {Atr}
add column separator
add column average day range (21){ADR%}



do not draw MACD(12,26)
do not drawn line 0
do not draw MA(250)
do not draw MA(50)
do not draw EMA(250)


SORT COLUMN 34 DESCENDING
chart-time is 75 days
]
SAFeTRADE
644 posts
msg #146467
- Ignore SAFeTRADE		 2/7/2019 2:09:18 PM

Change VXX to VXXB in filter and you will get Riskon and Riskoff to plot.

Fetcher[apply to symlist(spy,iwm,qqq,vxx)
set{vxxc, ind(vxxb,close)}
set{vixc, ind(^vix,close)}
set{vxvc, ind(vxv,close)}
set{spyc, ind(spy,close)}
set{spxl, ind(spxl,close)}
set{vix3, ind(^VIX3M,close)}

set{vxvvix, vxvc / vixc}
set{vixavg, cema(vxvvix,5)}
set{vxvvxx, vxvc / vxxc}
set{vxxavg, cema(vxvvxx,5)}



set{riskon, count(vxvvxx > or = to vxxavg,1)}
set{riskof, count(vxvvxx < or = to vxxavg,1)}

set{risk_on, count(vxvvxx crossed above vxxavg,1)}
set{risk_of, count(vxvvxx crossed below vxxavg,1)}


draw ma(50)
draw ma(100)
draw ma(200)

draw vxvvxx on plot vxxavg
draw riskon
draw riskof


add column riskon{riskon=long_spy}
add column separator
add column riskof{riskoff=short_spy}
add column separator

/* Bull or Bear by Marty Chenard */
/* http://www.stocktiming.net/?p=3711 February 5, 2018 */
/* https://www.stockfetcher.com/forums/Filter-Exchange/Connors-TPS/146101/99999 */
/* bull when all three indices have rsi(30) > 50 */
/* bear when all three indices have rsi(30) < 50 */
/* deterioration when one or more indices have rsi(30) < 50 */

set{RSI30, RSI(30) - 50} /* davesaint86 */
set{CRSI_Bar, RSI30} /* davesaint86 */
draw CRSI_Bar /* davesaint86 */
PlotType{CRSI_Bar,zerobar} /* davesaint86 */
add column rsi(7)
add column rsi(14)
add column rsi(30)
chart-length 6 months]
shillllihs
6,044 posts
msg #146469
- Ignore shillllihs		 2/7/2019 2:52:50 PM

It’s neat that everyone is providing these long/short market filters, but the only problem is they’re all slightly contradictory of each other. Anyone else kind of bemused by this?
StockFetcher Forums · General Discussion · Is this a crash or a correction?<< 1 ... 18 19 20 21 22 >>Post Follow-up

StockFetcher Tools
Filter Editor
My Filters
Watch Lists
Chart+
Find Similar Stocks
Shared Lists
Popular Resources
StockFetcher Forums
Indicator List
Filter Phrases
Examples
Site Search
Sector/Industry List
Usage Guide
Support
Contact Us
Support Home

Subscriber
Subscriber Benefits
Settings
Chart
Results
MyFilters
*** Disclaimer *** StockFetcher.com does not endorse or suggest any of the securities which are returned in any of the searches or filters. They are provided purely for informational and research purposes. StockFetcher.com does not recommend particular securities. StockFetcher.com, Vestyl Software, L.L.C. and involved content providers shall not be liable for any errors or delays in the content, or for any actions taken based on the content.


Copyright 2022 - Vestyl Software L.L.C.•Terms of Service | License | Questions or comments? Contact Us
EOD Data sources: DDFPlus & CSI Data Quotes delayed during active market hours. Delay times are at least 15 mins for NASDAQ, 20 mins for NYSE and Amex. Delayed intraday data provided by DDFPlus


This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.