StockFetcher Forums · Filter Exchange · THE ONE & ONLY DOMINATOR! THE NEW DMA(28,-14)<< 1 ... 7 8 9 10 11 >>Post Follow-up
alf44
2,025 posts
msg #40757
Ignore alf44
modified
1/28/2006 11:45:51 AM

heypa,

You say:

"...I just don't get it..."

----------------

Seems to me you are one of the few here that DOES "get it" !

Welcome aboard !


Regards,

alf44





riggs
313 posts
msg #40760
Ignore riggs
1/28/2006 12:54:51 PM

THERUMPLEDONE -

How are you? Just got back from vacation, now check your email and tell me what you think.


RIGGS.


riggs
313 posts
msg #40759
Ignore riggs
modified
1/28/2006 12:55:30 PM

Fetcher[show stocks where 2 day slope of DMA(28,-14)is above 0 and DMA(28,-14)is above close and RSI(2)is below 1 and close is near bottom Linear Regression Line(60)and average volume(90)is above 300000 and volume is above 300000 add column DMA(28,-14)add column RSI(2)add column Bottom Linear Regression line(60)and offset 0 days


/* NORMALIZE accumulation distribution */

set{adval, INDPOSITION(accumulation distribution, 60) * 100 }

/* NORMALIZE momentum(12) */

set{moval, INDPOSITION(momentum(12), 60) * 100}

/* NORMALIZE rsi(2) */

set{rsval, RSI(2) }

/* NORMALIZE williams %r(10) */

set{wrval, INDPOSITION(williams %r(10), 60) * 100 }


/* DRAW THE MP RSIWLR CHART */

and draw wrval
and draw adval on plot wrval
and draw moval on plot wrval
and draw rsval on plot wrval
]





TheRumpledOne
6,411 posts
msg #40779
Ignore TheRumpledOne
1/30/2006 1:14:57 AM

Fetcher[
/* Trade Planner Filter Display */

set{ iAccountSize , 25000 }
set{ iPercentRisk, .02}
set{ iMarginMult , 1}
set{ iMaxDrawDownPct, .05}
set{ iEntryPrice , close}
set{ iProtectiveStop , 0}
set{ iAutoStopFactor , .01}
set{ iTargetPrice , close + .5}
set{ iAutoTargetOffset , 1}

/* enter your Upper Limit criteria */
set{UpperLim , High 5 Day High}

/* enter your Lower Limit criteria */
set{LowerLim , Low 5 Day Low}

set{ Dynamic_Range , UpperLim - LowerLim }

set{ xFib4 , Dynamic_Range * .618 }

set { xPriceTarget1 , LowerLim + xFib4 }

set{ xProtectiveStop , LowerLim - iAutoStopFactor }

set{AcctxMar, iAccountSize * iMarginMult }

set{ xTradeRisk , AcctxMar * iPercentRisk}

set { xShareRisk , iEntryPrice - xProtectiveStop }

set { tShares , xTradeRisk / xShareRisk }

set { aShares , AcctxMar / iEntryPrice }

set { xShares , min( tShares, aShares ) }

add column xShares
add column xPriceTarget1
add column xProtectiveStop

show stocks where 2 day slope of DMA(28,-14) is above 0
and DMA(28,-14) is above close
and RSI(2)is below 1
and close is near bottom Linear Regression Line(60)
and average volume(90) is above 300000
and volume is above 300000
add column DMA(28,-14)
add column RSI(2)
add column Bottom Linear Regression line(60)

/* NORMALIZE accumulation distribution */

set{adval, INDPOSITION(accumulation distribution, 60) * 100 }

/* NORMALIZE momentum(12) */

set{moval, INDPOSITION(momentum(12), 60) * 100}

/* NORMALIZE rsi(2) */

set{rsval, RSI(2) }

/* NORMALIZE williams %r(10) */

set{wrval, INDPOSITION(williams %r(10), 60) * 100 }


/* DRAW THE MP RSIWLR CHART */

and draw wrval
and draw adval on plot wrval
and draw moval on plot wrval
and draw rsval on plot wrval

]



I added my TRADE PLANNER FILTER DISPLAY... thought you may like it :)




riggs
313 posts
msg #39316
Ignore riggs
modified
2/16/2006 8:29:00 PM

For those of you lucky enough to actually see this post, I'm releasing the 3 new filters as promised. I just got a great corporate gig because of these filters, so I won't be spending much time here anylonger. An ivestor that saw my filters somewhere else on the internet, has hired me to head up his research department, and his trading room. Now unlike the other investors last week, he seems to think we should "spread the wealth along to everyone."

Now with this being my very last post, I want to make sure you all understand what to look for, and how to use "The 3 Dominators!" As I said last week, "you'll never use another filter ever again." Someone recently asked me "why don't I just use rsi-2 and be done with it?" Had I been able to post, I would have told him, it's because rsi(2)does NOT foretell the future like my filters do. The only thing rsi(2)tells you is...the stock has bottomed out and no more harm can be done to it. But, It doesn't tell you good things are to come like DMA. How many times do we see DMA fall WITH rsi-2 below 1? Too many if you really want to know. rsi-2 IMHO is no better than the MACD Histogram IMO. In fact, I see much better results from MACD-H! RSI-2 is nothing more than a 50/50 daytraders entry indicator.It doesn't tell you about the future price of a stock, and more times than not, it will sit below 1 for days on end!

So enough of "that little indicator that MIGHT." DMA(Displaced M.A)will NEVER leave you looking in through the out door! In fact, it rings a bell and TELLS the other lagging moving averages to "get up here now!" And we already know that price will ALWAYS follow suit. I noticed some of you were fighting with the "slope" of the DMA. You had the wording correct, but it wasn't in the right place. The phrasing needed to be # 1. priority! That meant the filter itself needed to START with the "slope" phrasing. So thats how I took care of the "slope" issue. Next, you'll notice I strategically placed the EMA(39)more than 2% above price, so that when the EMA(3)crosses over it, there will be a BLAST of energy! and it will happen EVERYTIME without fail! Then the EMA(13)will get ahold of the EMA(39), and that's when the stock catapults! By this time(3 or 4 days later), you will be ready to exit EARLY and catch the next one.

I have looked at HUNDREDS of filters, and nothing even comes close to the regularity and precise price targeting of this filter. The beautiful thing about it is, you can make it(DMA)do what ever you want. Can rsi-2 do that? Not in this lifetime! Will it give you price targets? Never! Does it ring a bell? Yes, rsi-2 tells you when it's lunch time and thats it! Heck, even I can see a Sharks fin in the water on a surfboard! But DMA equips the surfer with infrared high powered Binoculars, so he sees the Shark fin 3 swells away under a dim moonlight night!

# 1. DMA 5% FILTER:

Fetcher[Show stocks where 2 day slope of DMA(28,-14)is above 0 and
EMA(3)crossed below DMA(28,-14)within the last 3 days and
DMA(28,-14)is more than 5% above close and EMA(39)is more than 3% above close and average volume(90)is above 100000 and volume is above 100000 and close is above 2 and draw EMA(3)draw EMA(13)draw EMA(39)add column DMA(28,-14)add column Double stochastics(10,3)add column industry and sort column 6 and offset 0 days
]




Next you guys are gonna see the ELDER-RAYS magic. I've been talking about "Bullpower/Bearpower" since I came here, and finally someone(Maxreturn)wrote it in filter terms. Take a look at the "offset" days, 3 and 4 days back. Then you couple it with DMA, and you've got "DOMINATOR 2!" Get to know this filter, it will be your second best friend. Sorry about that wives....

# 2. DMA & Bullpower / Bearpower:

Fetcher[show stocks where 2 day slope of DMA(28,-14)is above 0 close and DMA(28,-14)is more than 3% above close Set{Bullpower,high minus EMA(13)}Set{Bearpower,low minus EMA(13)}draw Bullpower and draw Bearpower and Bullpower is below 0 and Bearpower is below 0 and Bearpower has been increasing the last 1 day and bullpower has been decreasing the last 1 day and close is above 40 and average volume(90)is above 100000 and volume is above 100000 and draw ema(3)draw ema(13)draw ema(39)add column DMA(28,-14)add column slow stochastics(5,3)add column industry and sort column 2 and offset 0 days]




We all know a market top is coming soon, so this filter is right on time at the time of this post 12/3/05. It's my DMA shorting filter. BTW, can you short stocks with rsi-2? I wonder...anyhoo, my shorting filter will get you in BEFORE the "dark cloud" covering. How many times have you tried to short a stock, but never got an uptick? This filter is geared to get you in EARLY just B-4 the storm. Now I implemented IMO the only reason to ever use RSI(2), so you'll see it's small occurrance in the filter, but it does play a nice role. Start looking for intraday reversal signals and get in. Don't worry about the price moving up a $1 or two, just take a long look at that DMA deep below. Pick the stocks with the widest range between price and DMA. In other words, if price is $22, then look for DMA to be around $18-$19. That way, you will cover around $16-$17. BTW, price will ALWAYS surpass DMA by a couple of dollars. DMA is not like other moving averages, price rarely rests on the DMA. Now the beauty of this is, you will cover the same way as Filter # 1. It's just that easy!!!


# 3. DMA SHORTING FILTER:

Fetcher[show stocks where DMA(28,-14)is more than 5% below close and EMA(13)crossed above DMA(28,-14)within the last 3 days and RSI(2)is above 99 and average volume(90)is above 100000 and volume is above 100000 and volume is less than average volume(5)and close is above 5 and draw Double stochastics(10,3)draw EMA(3)draw EMA(13)draw EMA(39)add column DMA(28,-14)add column Double stochastics(10,3)add column industry and sort column 6 descending and offset 0 days]




Well, there you have it. Do your OWN research and you'll see that there aren't 3 better filters around. Now remember, SF isn't perfect, so only look for stocks where DMA is pointing up or horizonatlly across the chart. I'll add a couple of fun filters to go along with these, but these are all you'll ever need. So you can all stop e-mailing me everyone(EBAY People) "THE ONE & ONLY DOMINATORS" are now yours!


THE MIGHTY RIGGS!



riggs
313 posts
msg #41266
Ignore riggs
modified
2/16/2006 11:22:47 PM

I told all of you some time ago to never overlook Elder-Rays "Bullpower/Bearpower." Check out the performance of these scans....

Fetcher[show stocks where 2 day slope of DMA(28,-14)is above 0 close and DMA(28,-14)is more than 3% above close Set{Bullpower,high minus EMA(13)}Set{Bearpower,low minus EMA(13)}draw Bullpower and draw Bearpower and Bullpower is below 0 and Bearpower is below 0 and Bearpower has been increasing the last 1 day and bullpower has been decreasing the last 1 day and close is above 40 and average volume(90)is above 100000 and volume is above 100000 and draw ema(5)draw ema(13)draw ema(39)add column DMA(28,-14)add column slow stochastics(5,3)add column industry and sort column 2 descending and offset 3 days]




Fetcher[show stocks where 2 day slope of DMA(28,-14)is above 0 close and DMA(28,-14)is more than 3% above close Set{Bullpower,high minus EMA(13)}Set{Bearpower,low minus EMA(13)}draw Bullpower and draw Bearpower and Bullpower is below 0 and Bearpower is below 0 and Bearpower has been increasing the last 1 day and bullpower has been decreasing the last 1 day and close is above 40 and average volume(90)is above 100000 and volume is above 100000 and draw ema(5)draw ema(13)draw ema(39)add column DMA(28,-14)add column slow stochastics(5,3)add column industry and sort column 2 descending and offset 4 days]




Fetcher[show stocks where 2 day slope of DMA(28,-14)is above 0 close and DMA(28,-14)is more than 3% above close Set{Bullpower,high minus EMA(13)}Set{Bearpower,low minus EMA(13)}draw Bullpower and draw Bearpower and Bullpower is below 0 and Bearpower is below 0 and Bearpower has been increasing the last 1 day and bullpower has been decreasing the last 1 day and close is above 40 and average volume(90)is above 100000 and volume is above 100000 and draw ema(5)draw ema(13)draw ema(39)add column DMA(28,-14)add column slow stochastics(5,3)add column industry and sort column 2 descending and offset 5 days]




Fetcher[show stocks where 2 day slope of DMA(28,-14)is above 0 close and DMA(28,-14)is more than 3% above close Set{Bullpower,high minus EMA(13)}Set{Bearpower,low minus EMA(13)}draw Bullpower and draw Bearpower and Bullpower is below 0 and Bearpower is below 0 and Bearpower has been increasing the last 1 day and bullpower has been decreasing the last 1 day and close is above 40 and average volume(90)is above 100000 and volume is above 100000 and draw ema(5)draw ema(13)draw ema(39)add column DMA(28,-14)add column slow stochastics(5,3)add column industry and sort column 2 descending and offset 7 days]




DMA IS THE ONLY WAY!



RIGGS











TheRumpledOne
6,411 posts
msg #41273
Ignore TheRumpledOne
2/17/2006 1:18:06 AM

Riggs:

Check your email!!!


riggs
313 posts
msg #41274
Ignore riggs
2/17/2006 2:11:49 AM

Avery, check your's......


sdcclark
26 posts
msg #41425
Ignore sdcclark
2/20/2006 4:32:04 PM

On Dominator Two is this a pick for Short Time Bulish stocks and also should the 3 to 4 offset before running the stock picksbe added to the filter or just manually look back 3-4 day's

Thanks Scott


cello13
88 posts
msg #41415
Ignore cello13
modified
2/21/2006 9:27:48 AM

Hi Riggs

Read your posts about the use of DMA (First page of this thread, 5%), but I couldn't find a post about defining the price target. Could you do me this favour and explain it, please?

Thx in advance for your reply. Take share ;-)

Cheers




StockFetcher Forums · Filter Exchange · THE ONE & ONLY DOMINATOR! THE NEW DMA(28,-14)<< 1 ... 7 8 9 10 11 >>Post Follow-up

*** Disclaimer *** StockFetcher.com does not endorse or suggest any of the securities which are returned in any of the searches or filters. They are provided purely for informational and research purposes. StockFetcher.com does not recommend particular securities. StockFetcher.com, Vestyl Software, L.L.C. and involved content providers shall not be liable for any errors or delays in the content, or for any actions taken based on the content.


Copyright 2022 - Vestyl Software L.L.C.Terms of Service | License | Questions or comments? Contact Us
EOD Data sources: DDFPlus & CSI Data Quotes delayed during active market hours. Delay times are at least 15 mins for NASDAQ, 20 mins for NYSE and Amex. Delayed intraday data provided by DDFPlus


This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.