And The Hits Just Keep On Coming!!! - StockFetcher.com Stock Screener

StockFetcher Forums · Filter Exchange · And The Hits Just Keep On Coming!!!

<< 1 2 3 4 >>Post Follow-up

WALLSTREETGENIUS 983 posts msg #41946 - Ignore WALLSTREETGENIUS modified	3/12/2006 5:55:56 PM As always....very, very nice work Avery. That's why we keep you around man! ****************************************************************************** as for your comments.... "If you wanted divergence, then why didn't you program the filter to find divergence in the first place?" " It's funny, you call it YOUR FILTER(ACCUMULATION WARM POP-80) when about 90% of the code came from my filter!" **************************************************************************** The problem with your coding is.... way too many columns and half of them most traders don't know what the hell they are. And more than half of the "results" in YOUR divergence filter, don't even show divergence! When "all" the results in my filter show actual divergence. So what's the point? And who want's to see a filter with over 140 results anyway? And why make a seperate filter for Force Index(2)? Nobody in the world would use it for a stand alone filter anyway. So no, i DON'T "Owe You" anything pal. So really Avery...most of the time your work is all for not. Sorry, but again...nobody asked ya! And that "90% of the code"...Dude, nobody even noticed "YOUR ZOOM LENS" till "I" brought it to the forfront and turned it into an ACTUAL filter. So sorry for the simplicity of todays filters, but I'm a little hung over from NASCAR in Vegas yesterday, but I think most traders here would rather use MY filters than something Einstein would have coded. Just my opinion of course. But yes...RSI(2)rocks! And we all have you to thank for it. Gooo NASCAR!!!!! THE MIGHTY RIGGS ACCUMULATION WARM POP-80 ** Fetcher[show stocks where close is above 20 60 day slope of close is above 0 Do not draw 60 day slope of close Draw 3-day slope of EMA(13) draw EMA(13) Set{Bullpower, high minus ema(13)} Set{Bearpower, low minus ema(13)} set{BLb,days(BullPower is above BullPower 1 day ago,100)} set{BLa,days(BullPower is below BullPower 1 day ago,100)} set{BLxBL, BLa - BLb} set{BRb,days(BearPower is above BearPower 1 day ago,100)} set{BRa,days(BearPower is below BearPower 1 day ago,100)} set{BRxBR, BRa - BRb} Bearpower is below 0 Draw Bullpower Draw Bearpower add column BLxBL add column BRxBR Draw RSI(2) average volume(90)is above 100000 volume is above 100000 sort column 3 Descending offset 0 days /* NORMALIZE accumulation distribution / set{adval, INDPOSITION(accumulation distribution, 60) 100 } /* NORMALIZE momentum(12) / set{moval, INDPOSITION(momentum(12), 60) 100} /* NORMALIZE CCI(14) / set{ccval, INDPOSITION(CCI(14), 60) 100 } /* NORMALIZE williams %r(10) / set{wrval, INDPOSITION(williams %r(10), 60) 100 } /* DRAW THE MP CCIWLR CHART / and draw wrval and draw adval on plot wrval and draw moval on plot wrval and draw ccval on plot wrval add column adval add column ccval add column moval add column wrval adval is Above 80 ccval is Below 5 moval is Below 5 wrval is Below 5] * RSI(2) DIVERGENCE & ACCUMULATION WARM POP-80 ** Fetcher[close is above 20 close is below open RSI(2)is above RSI(2)2 days ago and RSI(2)is decreasing 1 day 60-day slope of close is above 0 Do not draw 60-day slope of close Draw EMA(13) Set{Bullpower, high minus ema(13)} Set{Bearpower, low minus ema(13)} set{BLb,days(BullPower is above BullPower 1 day ago,100)} set{BLa,days(BullPower is below BullPower 1 day ago,100)} set{BLxBL, BLa - BLb} set{BRb,days(BearPower is above BearPower 1 day ago,100)} set{BRa,days(BearPower is below BearPower 1 day ago,100)} set{BRxBR, BRa - BRb} Draw Bullpower Draw Bearpower add column BLxBL add column BRxBR Draw Bullpower Draw Bearpower average volume(90)is above 100000 volume is above 100000 sort column 2 descending offset 1 days /* NORMALIZE accumulation distribution / set{adval, INDPOSITION(accumulation distribution, 60) 100 } /* NORMALIZE momentum(12) / set{moval, INDPOSITION(momentum(12), 60) 100} /* NORMALIZE CCI(14) / set{ccval, INDPOSITION(CCI(14), 60) 100 } /* NORMALIZE williams %r(10) / set{wrval, INDPOSITION(williams %r(10), 60) 100 } /* DRAW THE MP CCIWLR CHART */ and draw wrval and draw adval on plot wrval and draw moval on plot wrval and draw ccval on plot wrval add column adval add column ccval add column moval add column wrval adval is above 80 ccval is below 30 moval is below 30 wrval is below 30] RIGGS
TheRumpledOne 6,411 posts msg #41948 - Ignore TheRumpledOne modified	3/12/2006 6:18:13 PM ****************************************************************************** The problem with your coding is.... way too many columns and half of them most traders don't know what the hell they are. And more than half of the "results" in YOUR divergence filter, don't even show divergence! And that "90% of the code"...Dude, nobody even noticed "YOUR ZOOM LENS" till "I" brought it to the forfront and turned it into an ACTUAL filter. ****************************************************************************** Way too many columns? Just use the ones you want! The columns are displays. Obviously, Riggs, you don't know divergence when it's staring you in the face! LOL! Lower Price making higher RSI value.. that's positive divergence. LOOK AGAIN, RIGGS, there's divergence! Riggs, you must really be hungover with a statement like "nobody noticed my ZOOM LENS." GO SOBER UP!
guru_trader 485 posts msg #41949 - Ignore guru_trader	3/12/2006 6:28:32 PM This thread gets better with every post. :D
WALLSTREETGENIUS 983 posts msg #41950 - Ignore WALLSTREETGENIUS modified	3/12/2006 7:27:38 PM Avery said.... "Obviously, Riggs, you don't know divergence when it's staring you in the face! LOL! "Lower Price making higher RSI value.. that's positive divergence. LOOK AGAIN, RIGGS, there's divergence! Riggs, you must really be hungover with a statement like "nobody noticed my ZOOM LENS." GO SOBER UP!" Avery, I honestly don't know why you spend soooo much time on my threads, so I guess you see me as a threat of some sort. Dude, no one on this site has more professional respect for you than I do. With that said...REAL "positive divergence" is when price reaches a certain BOTTOM and RSI(2)COMPLETES a recent BOTTOM higher than the previous BOTTOM. Divergence is NOT when price reaches a bottom and RSI(2)skywards above 75! And really you want the COMPLETED bottom below 50, NOT above it. That my friend is NOT what we want to see in a chart. So maybe YOU should look at a couple more thousand charts B-4 railroading my threads. Is it by accident that 31 of 32 results in "MY" divergence filter all rose after just 1 trading day? You surprise me Avery. And BTW, YOU go "LOOK AGAIN" at your "MOMENTUM ZOOM LENS" thread....Not a SINGLE follow up post. Oops, I'm sorry...there were THREE(3) including myself! LOL! "Go sober up" yeah right....LOL... Here Avery, this is what you want to see in a REAL RSI(2)divergence filter. Fetcher[close is above 20 close is below open RSI(2)is above RSI(2)2 days ago and RSI(2)is decreasing 1 day 60-day slope of close is above 0 Do not draw 60-day slope of close Draw EMA(13) Set{Bullpower, high minus ema(13)} Set{Bearpower, low minus ema(13)} set{BLb,days(BullPower is above BullPower 1 day ago,100)} set{BLa,days(BullPower is below BullPower 1 day ago,100)} set{BLxBL, BLa - BLb} set{BRb,days(BearPower is above BearPower 1 day ago,100)} set{BRa,days(BearPower is below BearPower 1 day ago,100)} set{BRxBR, BRa - BRb} Draw Bullpower Draw Bearpower add column BLxBL add column BRxBR Draw Bullpower Draw Bearpower average volume(90)is above 100000 volume is above 100000 sort column 2 descending offset 1 days /* MP CCIWLR ANALYZER DISPLAY / / NORMALIZE accumulation distribution / set{adval, INDPOSITION(accumulation distribution, 60) 100 } /* NORMALIZE momentum(12) / set{moval, INDPOSITION(momentum(12), 60) 100} /* NORMALIZE CCI(14) / set{ccval, INDPOSITION(CCI(14), 60) 100 } /* NORMALIZE williams %r(10) / set{wrval, INDPOSITION(williams %r(10), 60) 100 } /* DRAW THE MP CCIWLR CHART */ and draw wrval and draw adval on plot wrval and draw moval on plot wrval and draw ccval on plot wrval add column adval add column ccval add column moval add column wrval adval is above 80 ccval is below 30 moval is below 30 wrval is below 30] Will the REAL RSI(2) expert please stand up????? I need to sit down now....I feel like I'm gonna puke. Slow Gin and Budwiser don't mix..... RIGGS
TheRumpledOne 6,411 posts msg #41951 - Ignore TheRumpledOne modified	3/12/2006 7:36:05 PM Rigg's you are not a threat to me. POSITIVE DIVERGENCE IS LOWER PRICES MAKING HIGHER READINGS ON AN INDICATOR. Now, if what you want is Pos Div off a recent bottom, that's a subset of Pos Div! And Riggs, just because no one has anything to say on a thread doesn't imply it's not read! My TREND Indicator on TradeStation gets about 1,000 views per day! It's the most widely viewed thread by almost a 2 to 1 margin! And guess what, days can go by before someone posts on that thread. Yes, Riggs, go have a good puke..LOL!!
sdcclark 26 posts msg #41952 - Ignore sdcclark	3/12/2006 7:41:34 PM Excellent Filter one thing I am cnfused about should we add a date offset filter of 3 or buy as the scan picks it up and hold for 3 Thanks Scott
TheRumpledOne 6,411 posts msg #41954 - Ignore TheRumpledOne	3/12/2006 7:52:19 PM Using an offset just means the train left the station without you! You want to jump on while the divergence is occurring.
TheRumpledOne 6,411 posts msg #41956 - Ignore TheRumpledOne	3/12/2006 7:55:16 PM Here's the filter WITHOUT the offset: Fetcher[ /* L.E.A.L.E FILTER / close is above 20 close is below open RSI(2)is above RSI(2)2 days ago and RSI(2)is decreasing 1 day 60-day slope of close is above 0 Do not draw 60-day slope of close Draw EMA(13) Set{Bullpower, high minus ema(13)} Set{Bearpower, low minus ema(13)} set{BLb,days(BullPower is above BullPower 1 day ago,100)} set{BLa,days(BullPower is below BullPower 1 day ago,100)} set{BLxBL, BLa - BLb} set{BRb,days(BearPower is above BearPower 1 day ago,100)} set{BRa,days(BearPower is below BearPower 1 day ago,100)} set{BRxBR, BRa - BRb} Draw Bullpower Draw Bearpower add column BLxBL add column BRxBR average volume(90)is above 100000 volume is above 100000 sort column 2 descending / MP RSIWLR ANALYZER DISPLAY / / NORMALIZE accumulation distribution / set{adval, INDPOSITION(accumulation distribution, 60) 100 } /* NORMALIZE momentum(12) / set{moval, INDPOSITION(momentum(12), 60) 100} /* NORMALIZE CCI(14) / set{ccval, INDPOSITION(CCI(14), 60) 100 } /* NORMALIZE williams %r(10) / set{wrval, INDPOSITION(williams %r(10), 60) 100 } /* NORMALIZE rsi(2) / set{rsval, RSI(2) } set{nd2,count( close below close 2 days ago,1) count( rsi(2) above rsi(2) 2 days ago,1)} set{nd3,count( close below close 3 days ago,1) * count( rsi(2) above rsi(2) 3 days ago,1)} set{nd4,count( close below close 4 days ago,1) * count( rsi(2) above rsi(2) 4 days ago,1)} Set{n2, nd4 * 10} Set{n3, nd3 * 100} Set{n4, nd2 * 1000} set{na, n2 + n3} Set{PD2345, na + n4} /* DRAW THE MP RSIWLR CHART */ and draw wrval and draw adval on plot wrval and draw moval on plot wrval and draw rsval on plot wrval and draw ccval on plot wrval add column PD2345 add column wrval add column adval add column rsval add column moval add column ccval adval is above 80 ccval is below 30 moval is below 30 wrval is below 30 ] I also added the PD2345 column so you know where the divergence occurred. MAY ALL YOUR FILLS BE COMPLETE.
WALLSTREETGENIUS 983 posts msg #41957 - Ignore WALLSTREETGENIUS modified	3/12/2006 8:02:30 PM Avery You said..... "POSITIVE DIVERGENCE IS LOWER PRICES MAKING HIGHER READINGS ON AN INDICATOR." W-R-O-N-G A-G-A-I-N! I dare you to cut & paste that quote from ANYWHERE on the net. LOL... Divergence AGAIN is..." Prices making LOWER bottoms and RSI(2), CCI(7), FI(2) etc. COMPLETING higher bottoms than the previous bottom. Wow Avery, I had no Idea you were so lacking in this area. It's kind of funny though. It's like us all waiting for the space shuttle to return and seeing a Monkee be the first to step out of it. LOL...I STRONGLY suggest you google "Divergence" tonight and get a better grip on this thing. I've taken you about as far as I would like at this point. Wow! amazing..... Here again is DIVERGENCE at it's finest. You WON'T see RSI(2)in overbought levels after 1 trading day like you see everywhere on YOUR filter. But I must say...You're filter L@@KS smarter and prettier. Fetcher[close is above 20 close is below open RSI(2)is above RSI(2)2 days ago and RSI(2)is decreasing 1 day 60-day slope of close is above 0 Do not draw 60-day slope of close Draw EMA(13) Set{Bullpower, high minus ema(13)} Set{Bearpower, low minus ema(13)} set{BLb,days(BullPower is above BullPower 1 day ago,100)} set{BLa,days(BullPower is below BullPower 1 day ago,100)} set{BLxBL, BLa - BLb} set{BRb,days(BearPower is above BearPower 1 day ago,100)} set{BRa,days(BearPower is below BearPower 1 day ago,100)} set{BRxBR, BRa - BRb} Draw Bullpower Draw Bearpower add column BLxBL add column BRxBR Draw Bullpower Draw Bearpower average volume(90)is above 100000 volume is above 100000 sort column 2 descending offset 1 days /* MP CCIWLR ANALYZER DISPLAY / / NORMALIZE accumulation distribution / set{adval, INDPOSITION(accumulation distribution, 60) 100 } /* NORMALIZE momentum(12) / set{moval, INDPOSITION(momentum(12), 60) 100} /* NORMALIZE CCI(14) / set{ccval, INDPOSITION(CCI(14), 60) 100 } /* NORMALIZE williams %r(10) / set{wrval, INDPOSITION(williams %r(10), 60) 100 } /* DRAW THE MP CCIWLR CHART */ and draw wrval and draw adval on plot wrval and draw moval on plot wrval and draw ccval on plot wrval add column adval add column ccval add column moval add column wrval adval is above 80 ccval is below 30 moval is below 30 wrval is below 30] RIGGS
WALLSTREETGENIUS 983 posts msg #41955 - Ignore WALLSTREETGENIUS modified	3/12/2006 8:03:16 PM Avery You said..... "POSITIVE DIVERGENCE IS LOWER PRICES MAKING HIGHER READINGS ON AN INDICATOR." W-R-O-N-G A-G-A-I-N! I dare you to cut & paste that quote from ANYWHERE on the net. LOL... Divergence AGAIN is..." Prices making LOWER bottoms and RSI(2), CCI(7), FI(2) etc. COMPLETING higher bottoms than the previous bottom. Wow Avery, I had no Idea you were lacking in this area. It's kind of funny though. It's like us all waiting for the space shuttle to return and seeing a Monkee be the first to step out of it. LOL...I STRONGLY suggest you google "Divergence" tonight and get a better grip on this thing. I've taken you about as far as I would like at this point. Wow! amazing..... Here again is DIVERGENCE at it's finest. You WON'T see RSI(2)in overbought levels after 1 trading day like you see everywhere on YOUR filter. But I must say...You're filter L@@KS smarter and prettier. Fetcher[close is above 20 close is below open RSI(2)is above RSI(2)2 days ago and RSI(2)is decreasing 1 day 60-day slope of close is above 0 Do not draw 60-day slope of close Draw EMA(13) Set{Bullpower, high minus ema(13)} Set{Bearpower, low minus ema(13)} set{BLb,days(BullPower is above BullPower 1 day ago,100)} set{BLa,days(BullPower is below BullPower 1 day ago,100)} set{BLxBL, BLa - BLb} set{BRb,days(BearPower is above BearPower 1 day ago,100)} set{BRa,days(BearPower is below BearPower 1 day ago,100)} set{BRxBR, BRa - BRb} Draw Bullpower Draw Bearpower add column BLxBL add column BRxBR Draw Bullpower Draw Bearpower average volume(90)is above 100000 volume is above 100000 sort column 2 descending offset 1 days /* MP CCIWLR ANALYZER DISPLAY / / NORMALIZE accumulation distribution / set{adval, INDPOSITION(accumulation distribution, 60) 100 } /* NORMALIZE momentum(12) / set{moval, INDPOSITION(momentum(12), 60) 100} /* NORMALIZE CCI(14) / set{ccval, INDPOSITION(CCI(14), 60) 100 } /* NORMALIZE williams %r(10) / set{wrval, INDPOSITION(williams %r(10), 60) 100 } /* DRAW THE MP CCIWLR CHART */ and draw wrval and draw adval on plot wrval and draw moval on plot wrval and draw ccval on plot wrval add column adval add column ccval add column moval add column wrval adval is above 80 ccval is below 30 moval is below 30 wrval is below 30] RIGGS

StockFetcher Forums · Filter Exchange · And The Hits Just Keep On Coming!!!

<< 1 2 3 4 >>Post Follow-up

StockFetcher Tools
Filter Editor
My Filters
Watch Lists
Chart+
Find Similar Stocks
Shared Lists

Popular Resources
StockFetcher Forums
Indicator List
Filter Phrases
Examples
Site Search
Sector/Industry List
Usage Guide

Support
Contact Us
Support Home

Subscriber
Subscriber Benefits

Settings
Chart
Results
MyFilters

*** Disclaimer *** StockFetcher.com does not endorse or suggest any of the securities which are returned in any of the searches or filters. They are provided purely for informational and research purposes. StockFetcher.com does not recommend particular securities. StockFetcher.com, Vestyl Software, L.L.C. and involved content providers shall not be liable for any errors or delays in the content, or for any actions taken based on the content.

Copyright 2022 - Vestyl Software L.L.C.•Terms of Service | License | Questions or comments? Contact Us
EOD Data sources: DDFPlus & CSI Data Quotes delayed during active market hours. Delay times are at least 15 mins for NASDAQ, 20 mins for NYSE and Amex. Delayed intraday data provided by DDFPlus

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.